Rust Remover and Natural Rust Removers
Rust Removers
Removing and treating surface rust, on panel steel, use of modern grinding wheels , on the out side edge, then a drill to dig out the pitted oxides, then bear metal treatment with the best quality rust converters and protective paints.
Duration : 0:5:53
Make natural rust remover by mixing baking soda and lemon juice or vinegar into a paste, which can be applied to any metal surface that has rust on it. Allow the rust remover to dissolve the rust and then wipe it off using instructions from a remodeling contractor and home repair specialist in this free video on rust remover.
Expert: Tim Gipson
Contact: www.inhisstepsremodeling.com
Bio: Tim Gipson is a home repair specialist and remodeling contractor in Franklin, Tenn.
Filmmaker: Tim Brown
Duration : 0:2:24
Continue reading “Home Improvements & Maintenance : How to Make a Rust Remover”
My header pipe on my DRZ was looking a bit crusty (as they eventually do)
I decided to give it a bit of a clean up.
It was a quick job. I never even took the pipe off.
Must of only cost me around £20 to do all this.
Tools:
High Temp Black Paint Stove BBQ (120ml, more than enough)
Hammerite Rust Remover Gel (100ml, more than enough)
Sandpaper
Brush 1″ width
Duration : 0:2:53
Citric acid can be bought from drugstore (they use it in jelly or such to adjust acidity) but it is very expensive there. Therefore Finnish rodders buy it from some agriculture-store. It is not expensive. Officially it is used as pigs obstruent! I dipped those parts in citric acid for overnight, next day brushed it with wirebrush and flushed it with water. Then again back to citric acid over night and wirebrushed + flushed it next day.
Flushing is important, you’ll want to get all acid away, otherwise steel will turn to yellow.
You can’t use this method on all parts because of hydrogen embrittlement. So no pedals, frames, brake drums, engine blocks or such to citric acid!!! And yeah, parts should be clean -I’ve cleaned ’em with fuel- because grease will neutralize acid. Ratio was 3%
Parts must be dried soon as you get them flushed, I quess you guys know why…
Music on the background:
Junior Brown; “Sugarfoot Rag”
Duration : 0:4:14