Get Out That Stubborn Stain

Chances are you know about following the how to clean instructions on labels that are sewn into your cloths? But what if you spill wine, or find that you have a nasty rust stain on your new blouse or shirt?

The first thought that may enter your mind, can I or can’t I use bleach safely? Labels at best tell you weather its safe to wash or dry clean only. Sometimes a label will mention if it’s safe to use bleach or not. But much of the time there is no mention of bleach, or weather it can be used when laundering? Many of today newer fabrics, including colored fabrics, need bleach as well as detergent to help keep them clean, and free of stains.

A good tip to follow: When to use bleach? When the label doesn’t mention bleaching or says bleach when needed, you can safely use chlorine or non-chlorine bleach on the article of clothing, as a rule.

Now, what about stains that bleach just won’t get out or the fabric won’t tolerate bleach? I have listed some stain removal tips on common substances that as a rule are very hard to get out. Please keep in mind all of these stain removal tips work better if the garment is tended to quickly, without the stain having time to set, and dry. Depending how bad the stain is will determine the number of times the stain treatment may have to be repeated.

1. Wine:

Treat stain promptly. Apply a mixture of laundry detergent and glycerin, sponge in, leave in for a few minutes; sponge the stain with cool water. If persists repeat.

2. Grass or foliage:

Sponge the stain with rubbing alcohol. Then rub laundry detergent into stain, rinse with cool water. Repeat until stain is gone. Then launder article.

3. Ink:

Apply lukewarm water and glycerin to the stain. Blot with paper towel. Repeat until stain is gone.

4. Paint:

Treat stain immediately. Wash garment immediately in warm water and detergent. If stain does not come out sponge stain with turpentine, then soak garment over night in hot water.

5. Perspiration:

Sponge the garment with ammonia. Wash in warm water. If stain is old, sponge with white vinegar, let sit 10 minutes launder in warm water.

6. Rust:

Moisten stain with water. Sprinkle stain with salt. Drip on fresh lemon juice. Dry in the sun. Then wash in warm water, and detergent.

7. Urine:

Sponge the stain with white vinegar. Wash in cold water and detergent.

8. Blood:

Soak article in cold water. For old blood stains sponge stain with ammonia, then wash with cold water and detergent.

9. Coffee and Tea:

Immediately wet stain with hot water, work in laundry detergent into stain. Wash in hot water.

10. Axle grease or oil:

Scrape as much of the oil off as you can, wet with hot water, rub in detergent. Wash in warm water.

11. Chewing gum:

Rub stain with an ice cube .Scrape gum off with dull kitchen knife. Wash in detergent.

12. Cosmetics and crayon:

Apply liquid soap and rub into stain. Rinse thoroughly. For last trace of stain sponge stain with a mixture of liquid soap and ammonia, then wash in warm water.

Sharon Stajda
http://www.articlesbase.com/advertising-articles/get-out-that-stubborn-stain-53082.html

rust removal done what fluid and battery hook up?

I saw on T.V. one time about removal of rust from metal using a certain
fluid plus a metal rod to a battery with an electrical currant going thru the rod into fluid, and then by putting the rusty tool or whatever metal
into the fluid it charged the rust all off and came out rust free.

Hmm…Sounds like a science project, but I would suggest you simply go ahead and invest in a really good rust removal.

How To Keep Your Metal Items From Being Weakened

Through the years, rust has been one of the major causes of headache among home keepers and owners. Since almost all household items are created from iron metal or at least got a small part made of metal, every house is an attractive target of rust and its negative effects.

Rust is annoying and it is even considered as ‘metal cancer’ since the moment it attacks, a great intolerable damage is most likely to be expected. The reason why rust is such a pain is because it works to weaken the metal—something that anybody doesn’t like to see among sturdy items.

In case you own a car and you are living in a humid climate then there is a double chance that you will be battling with rust problems. That said, it is only necessary to perform proper car rust prevention by using good quality car rust remover that would work well for the long life of your vehicle.

Keep in mind that aside from the ugly sight that it gives, rust can also create a great havoc to your vehicle. Hence proper measures must be employed to promote rust prevention. It can in fact create holes in the metal sheets which can hamper the smooth running ability of your vehicle since it will jam metal objects which slides and moves when on their normal state. But the worse thing of all is; it can change your flashy car into something which is ruggedly made and people may even consider your driving machine as something that belongs to old age. Hence, if you wish to bring back the look of your driving machine into its former glory then it is only sensible to look for a rust removal product that can provide an effective and long lasting effect.

Since rust is a kind of an iron oxide and it would normally take place during the presence of moisture and air, then it is necessary to avoid these elements as much as possible. Look for those products that are UV resistant and provides outstanding adhesion. You should also go for those products that would get rid of the rust through the help of dual patented chemical process in order to get rid of dehydrated gases from its pores. If there are metal objects that you are not going to use for a long period of time, simply wrap them in order to promote dryness and to hamper moisture from coming in.

It is also sensible if you can prevent soaking metal objects in water. In case you accidentally do this, do not forget to thoroughly dry them up under the heat of the sun. Rusting can be prevented by these small actions. And since prevention is always better than cure, it is best to act right now than wait for the problem to get worse. It will be better as well if you can act right ahead on the first sign of rust than wait for it to creep into the whole metal object.

Truly, rust can create a big trouble. But if only you gear yourself with the necessary things in order to prevent rusting, then you can lessen the intensity of your problem. Go out and search for means that can help you bid goodbye to rust!

Markus Skupeika
http://www.articlesbase.com/home-improvement-articles/how-to-keep-your-metal-items-from-being-weakened-701696.html

Do you have any at home tips on rust removal on my 97' Buick Century?

I would like to remove a few spots of rust off my car by myself. What is the safest, cheapest way of doing so?

Are there any worthy touch up paints in the auto stores? If so, what brand?

Well first you need to get all the rust off the metal.
Either by sanding it off, or using a sand blaster.

Then you need to prime the metal and then paint it.

That is the correct way.

Any other way is a total waste of time, and it will come right back fast